SUSTAINABLE RECOVERY OF PRECIOUS METALS FROM CHLORIDE SOLUTIONS BY SOLVENT EXTRACTION

Authors

DOI:

https://doi.org/10.26408/135.03

Keywords:

sustainable recycling, waste electronic and electrical equipment (WEEE), precious metals, solvent extraction

Abstract

Solvent extraction in hydrometallurgical processing is a suitable method for precious metals extraction/separation from chloride solutions and therefore proven to be an alternative to the conventional method of separation. This paper presents results of the removal of palladium(II), gold(III) and platinum(IV) ions from chloride media in the extraction-stripping process using trihexyl(tetradecyl)-phosphonium tetrafluoroborate [3C6C14P]BF4 as the extractant. The efficiency of extractive separation of the examined metals depends on the acidity of the aqueous solution. The stripping from a loaded organic phase provides effective and quality separation of palladium(II), gold(III) and platinum(IV). The extractant studied ([3C6C14P]BF4) can be reused in the next cycles of the extraction-stripping-regeneration process without a significant loss in the extraction power, which is in line with the assumptions of sustainable recycling.

References

Act of 11 September 2015 on waste electrical and electronic equipment, Journal of Laws 2022, item 1622, consolidated text.

Baldé, C.P., Kuehr, R., Yamamoto, T., McDonald, R., D’Angelo, E., Althaf, S., Bel, G., Deubzer, O., Fernandez-Cubillo, E., Forti, V., Gray, V., Herat, S., Honda, S., Iattoni, G., Khetriwal, D.S., di Cortemiglia, V.L., Lobuntsova, Y., Nnorom, I., Pralat, N., Wagner M., 2024, International Telecommunication Union (ITU) and United Nations Institute for Training and Research (UNITAR), Global E-waste Monitor 2024, Geneva/Bonn.

Bernardis, F.L., Grant, R.A., Sherrington, D.C., 2005. A Review of Methods of Separation of the Platinum-Group Metals Through Their Chloro-Complexes, Reactive Functional Polymers, vol. 65, pp. 205–217.

Boudesocque, S., Mohamadou, A., Conreux A., Marin, B., Dupont, L., 2019. The Recovery and Selective Extraction of Gold and Platinum by Novel Ionic Liquids, Separation and Purification Technology, vol. 210, pp. 824–834.

Chauhan, G., Jadhao, P.R., Pant, K.K., Nigam, K.D.P., 2018, Novel Technologies and Conventional Processes for Recovery of Metals from Waste Electrical and Electronic Equipment: Challenges & Opportunities  A Review, Journal of Environmental Chemical Engineering, vol. 6, pp. 1288–1304.

Cieszyńska, A., Wieczorek D., 2018, Extraction and Separation of Palladium(II), Platinum(IV), Gold(III) and Rhodium(III) Using Piperidine-Based Extractants, Hydrometallurgy, vol. 175, pp. 359–366.

Cieszyńska, A., Wieczorek, D., 2020, Efficiency and Mechanism of Palladium(II) Extraction from Chloride Media with N‑Hexadecylpiperidinium Chloride, Journal of Solution Chemistry, vol. 49, pp. 486–503.

Costa, M.C., Assuncao, A., Almeida, R., da Costa, A.M.R., Nogueira, C., Paiva, A.P., 2018. N,N’-Dimethyl-N,N’-Dicyclohexylsuccinamide: A Novel Molecule for the Separation and Recovery of Pd(II) by Liquid-Liquid Extraction, Separation and Purification Technology, vol. 201, pp. 96–105.

Eurostat 2024, Waste Statistics - Electrical and Electronic Equipment, https://ec.europa.eu/eurostat/statistics-explained/index.php?title=Waste_statistics_-_electrical_and_electronic_equipment (access 10.04.2025).

Firmansyah, M. L., Kubota, F., Goto, M., 2018, Solvent Extraction of Pt(IV), Pd(II), and Rh(III) with the Ionic Liquid Trioctyl (Dodecyl) Phosphonium Chloride, Journal Chemical Technology and Biotechnology, vol. 93, no. 6, pp. 1714–1721.

Firmansyah, M.L., Rizki, I.N., Amalina, I., Jalil, A.A., Ullah, N., 2024, Recovery of Precious Metals from Mobile Phone Waste: Studies on Leaching and Adsorption by Functionalized Activated Carbon, Results in Engineering, vol. 22.

Gupta, B., Singh, I., 2013,. Extraction and Separation of Palladium and Rhodium using Cyanex 923 and Their Recovery from Real Samples, Hydrometallurgy, vol. 134–135, pp. 11–18.

He, J., Xiong Y., Xu, L., Wang, L., Yao, D., Xia, D., Tian, Y., Zhao, Z., 2022, Selective Extraction of Pd(II) using 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetra[(2-ethylthio)ethoxy]thiocalix [4] Arene as Extractant, Journal of Environmental Chemical Engineering, vol. 10, no. 5.

Heacock, M., Kelly, C.B., Asante, K.A., Birnbaum, L.S., Bergman, A.L., Bruné, M.-N., Buka, I., Carpenter, D.O., Chen, A., Huo, X., Kamel, M., Landrigan, P.J., Magalini, F., Diaz-Barriga, F., Neira, M., Omar, M., Pascale, A., Ruchirawat, M., Sly, L., Sly, P.D., Van den Berg, M., Suk1, W.A., 2016, E-waste and Harm to Vulnerable Populations: A Growing Global Problem, Environmental Health Perspectives, vol. 124, no. 5, pp. 550–555.

Holgersson, S., Steenari, B.M., Björkman, M., Cullbrand, K., 2018, Analysis of the Metal Content of Small-Size Waste Electric and Electronic Equipment (WEEE) Printed Circuit Boards, Part 1: Internet Routers, Mobile Phones and Smartphones, Resources Conservation and Recycling, vol. 133, pp. 300–308.

Hubicki, Z., Wójcik, G., 2006. Studies of Removal of Platinum(IV) Ion Microquantities from the Model Solutions of Aluminium, Copper, Iron, Nickel and Zinc Chloride Microquantities on the Anion Exchanger Duolite S 37, Journal Hazardous Materials B136, pp. 770–775.

Jha, M.K.,. Gupta, D., Lee, J.-ch., Kumar, V., Jeong, J., 2014, Solvent Extraction of Platinum Using Amine Based Extractants in Different Solutions: A Review, Hydrometallurgy, vol. 142, pp. 60–69.

Kaliyavaradhan, S.K., Prem, P.R., Ambily, P.S., Mo, K.H., 2022, Effective Utilization of E-Waste Plastics and Glasses in Construction Products - a Review and Future Research Directions, Resources Conservation and Recycling, vol. 176.

Khogare, B.T., Anuse, M.A., Piste, P.B., Kokare, B.N., 2016a, Development of a Solvent Extraction System with 4-heptylaminopyridine for the Selective Separation of Palladium(II) from Synthetic Mixture, Catalysts and Water Samples, Desalination and Water Treatment, vol. 57, pp. 21 634–21 644.

Khogare, B.T., Kamblec, G.S., Kokarec, A.N., Zanjec, S.B., Suryavanshic, V.J., Anuse, M.A., Piste, P.B., Kokare, B.N., 2016b, Development of Novel Solvent Extraction Method for Determination of Gold(III) using 4-heptylaminopyridine: Application to Alloys and Environmental Analysis, Journal of Environmental Chemical Engineering, vol. 4, pp. 3075–3083.

Kumar, A., Holuszko, M., Espinosa, D.C.R., 2017, E-Waste: An Overview on Generation, Collection, Legislation and Recycling Practices, Resources, Conservation and Recycling, vol. 122, pp. 32–42.

Kurniawan, K., Kim, S., Lee, J.-c., 2022, Ionic Liquids-Assisted Extraction of Metals from Electronic Waste. In Ionic Liquid-Based Technologies for Environmental Sustainability, Elsevier Amsterdam, The Netherlands, pp. 295–329.

Lim, C-R., Choi, J-W., Yun, Y-S., Cho, C-W., 2021, Selection of Low-Toxic and Highly Efficient Ionic Liquids for the Separation of Palladium and Platinum in Acidic Solution, and Prediction of the Metal Affinity of Ionic Liquids, Separation and Purification Technology, vol. 258.

Luhar, S., Luhar, I., 2019, Potential Application of E-Wastes in Construction Industry: A Review, Construction and Building Materials, vol. 203, pp. 222–240.

MacDonald, L., Zhang, D., Karamalidis, A., 2024, Platinum Group Metals: Key Solid Phase Adsorption Technologies for Separation from Primary and Secondary Sources, Resources, Conservation and Recycling, vol. 205.

Makvandi, S., Pagé, P., Tremblay, J., Girard, R., 2021, Exploration for Platinum-Group Minerals in Till: A New Approach to the Recovery, Counting, Mineral Identification and Chemical Characterization, Minerals, vol. 11, no. 3.

Matthey, J., 2024, PGM Market Reports May, https://matthey.com/products-and-markets/pgms-and-circularity/pgm-markets/pgm-market-reports (access 10.04.2025).

Michałek, T., Hessel, V., Wojnicki, M., 2024, Production, Recycling and Economy of Palladium: A Critical Review, Materials, vol. 17.

Mohdee, V., Maneeintr, K., Wannachod, T., Phatanasri, S., Pancharoen, U., 2018, Optimization of Process Parameters using Response Surface Methodologyfor Pd(II) Extraction with Quaternary Ammonium Salt from Chloride Medium: Kinetic and Thermodynamics Study, Chemical Papers, vol. 72, no. 12, pp. 3129–3139.

Moussaoui, S-A., Lélias, A., Braibant, B., Meyer, D., Bourgeois, D., 2021, Solvent Extraction of Palladium(II) using Diamides: A Performing Molecular System Established Through a Detailed Study of Extraction Kinetics, Separation and Purification Technology, vol. 276.

Mowafy, E.A., Mohamed, D., 2016, Extraction and Separation of Gold(III) from Hydrochloric Acid Solutions using Long Chain Structurally Tailored Monoamides, Separation and PurificationTechnology, vol. 167, pp. 146–153.

Mudal, U.K., Patil, M., Saravanabhavan, R., Saraswat, V.K., 2021, Review on E-Waste Recycling: Part I, A Prospective Urban Mining Opportunity and Challenges, Transactions of the Indian National Academy Engineering, vol. 6, pp. 547–568.

Müller, D., Groves, D.I., Santoshc, M., Yang, Ch-X., 2025, Critical Metals: Their Mineral Systems and Exploration, Geosystems and Geoenvironment, vol. 4.

Nguyen, T.H., Sonu, C.H., Lee, M.S., 2015, Separation of Platinum(IV) and Palladium(II) from Concentrated Hydrochloric Acid Solutions by Mixtures of Amines with Neutral Extractants, Journal of Industrial and Engineering Chemistry, vol. 32, pp. 238–245.

Nguyen, T.H., Sonu, C.H., Lee, M.S., 2016, Separation of Pt(IV), Rh(III) and Ir(III) from Concentrated Hydrochloric Acid Solutions by Solvent Extraction, Hydrometallurgy, vol. 164, pp. 71–77.

Nguyen, V.T., Riaño, S., Aktan, E., Deferm, C., Fransaer, J., Binnemans, K., 2021, Solvometallurgical Recovery of Platinum Group Metals from Spent Automotive Catalysts, ACS Sustainable Chemistry Engineering Journal, vol. 9, pp. 337–350.

Nguyen, V.T., Riaño, S., Binnemans, K., 2020, Separation of Precious Metals by Split-Anion Extraction using Water-Saturated Ionic Liquids, Green Chemistry, vol. 22, pp. 8375–8388.

Nikoloski, A.N., Ang, K.L., 2014, Review of the Application of Ion Exchange Resins for the Recovery of Platinum-Group Metals from Hydrochloric Acid Solution, Mineral Processing Extractive Metallurgy Review, vol. 35, pp. 369–389.

Ortet, O., Paiva, A.P., 2015, Development of Tertiary Thioamide Derivatives to Recovery Palladium(II) from Simulated Complex Chloride Solutions, Hydrometallurgy, vol. 151, pp. 33–41.

Paiva, A.P., Piedras, F.V., Rodrigues, P.G., Nogueira, C.A., 2022, Hydrometallurgical Recovery of Platinum-Group Metals from Spent Auto-Catalysts - Focus on Leaching and Solvent Extraction, Separation and Purification Technology, vol. 286.

Rzelewska-Piekut, M., Paukszta D., Regel-Rosocka, M., 2021, Hydrometallurgical Recovery of Platinum Group Metals from Spent Automotive Converters, Physicochemical Problems at Mineral Processing, vol. 57, pp. 83–94.

Rzelewska-Piekut, M., Regel-Rosocka, M., 2019, Separation of Pt(IV), Pd(II), Ru(III) and Rh(III) from Model Chloride Solutions by Liquid-Liquid Extraction with Phosphonium Ionic Liquids, Separation and Purification Technology, vol. 212, pp. 791–801.

Sasaki, Y., Morita, K., Morihisa, S., Hisamatsu, S., Yoshizuka, K., 2017, Presious Metal Extraction by N,N,N’,N’-Tetraoctyl-Thiodiglycolamide and Its Comparision with N,N,N’,N’-tetraoctyl-diglycolamide and methylimino-N,N’-dioctylacetamide, Hydrometallurgy, vol. 169, pp. 576–584.

Song, L., Wang, X., Li L., Wang, Z., Xu, H., He, L., Li, Q., Ding, S., 2022, Recovery of Palladium(II) from Strong Nitric Acid Solutions Relevant to High-Level Liquid Waste of PUREX Process by Solvent Extraction with Pyrazole-Pyridine-Based Amide Ligands, Hydrometallurgy, vol. 211.

Statista, https://www.statista.com (access 10.04.2025).

We, W., Cho, C.-W., Kim, S., Song, M.-H., Bediako, J.K., Yun, Y.-S., 2016, Selective Recovery of Au(III), Pt(IV), and Pd(II) from Aqueous Solutions by Liquid–Liquid Extraction using Ionic Liquid Aliquat-336, Journal of Molecular Liquids, vol. 216, pp. 18–24.

Wiecka, Z., Rzelewska-Piekut, M., Reis, M.T.A., Ismael, M.R.C., Wieszczycka, K., Regel-Rosocka, M., 2023, Pd(II) and Pt(IV) Dispersive or Non-Dispersive Extraction from Model and Real Leach Solutions with Alkoxyimine-1-propylpyridinium Derivatives, Separation and Purification Technology, vol. 317.

World Gold Council, 2024, Gold Demand Trends: Full Year 2024, https://www.gold.org/goldhub/research/gold-demand-trends/gold-demand-trends-full-year-2024 (access 10.04.2025).

Xiao, Q., Song, L., Wang, X., Xu, H., He, L., Li, Q., Ding, S., 2022, Highly Efficient Extraction of Palladium(II) in Nitric Acid Solution by a Phenanthroline-Derived Diamide Ligand, Separation and Purification Technology, vol. 280.

Yakoumis, I., Panou, M., Moschovi, A.M., Panias, D., 2021, Recovery of Platinum Group Metals from Spent Automotive Catalysts: A Review, Cleaner Engineering and Technology, vol. 3.

Zhang, L., Xu, Z., 2016, A Review of Current Progress of Recycling Technologies for Metals from Waste Electrical and Electronic Equipment, Journal of Cleaner Production, vol. 127, pp. 19–36.

Zheng, H., Hu D., Zhang, L., Ma, C.A., Rufford, T., 2012, Thiol Functionalized Mesoporous Silicas for Selective Adsorption of Precious Metals, Minerals Engineering, vol. 35, pp. 20–26.

Zulkernain, N.H., Basant, N., Ng, C.C., Salari, M., Mallick, S., 2023, Recovery of Precious Metals from E-Wastes through Conventional and Phytoremediation Treatment Methods: A Review and Prediction, Journal of Material Cycles and Waste Management, vol. 25, pp. 2726–2752.

Published

2025-09-26

How to Cite

Cieszyńska, A. (2025). SUSTAINABLE RECOVERY OF PRECIOUS METALS FROM CHLORIDE SOLUTIONS BY SOLVENT EXTRACTION. Scientific Journal of Gdynia Maritime University, 135(135), 31–45. https://doi.org/10.26408/135.03