ANALYSIS OF THE EFFECT OF THE ADDITION OF ALUMINUM POWDER ON POLYESTER-GLASS COMPOSITE PROPERTIES IN TENSILE AND HARDNESS TEST

Authors

DOI:

https://doi.org/10.26408/129.03

Keywords:

composites, aluminium powder, static tensile test, hardness, statistical analysis

Abstract

The study aimed to analyse the influence of aluminum powder on the mechanical properties of polyester-glass composites. Composite materials were made of glass fibres with random fibre direction and polyester resin with the addition of aluminum powder as a filler. The strength parameters of materials obtained during the static tensile test and hardness test were compared. The results were subjected to statistical analysis, taking into account the change in the amount of filler, microstructure was also observed using optical microscopy.
An analysis of the results showed that the addition of aluminum powder amounting to 2% of the weight of the composites reduces their hardness and, at the same time,  the longitudinal modulus of elasticity.The addition of aluminum powder amounting to 5% and 10% of the weight of the composites increased the hardness of the composites while reducing the Young's modulus. The values of hardness measurements were subjected to statistical analyses at significance level α = 95. The Shapiro-Wilk test confirmed that the hardness variables for all tested samples were in normal distributions, and therefore the most powerful parametric tests were used to test the differences. Using the Student's t-test, it was confirmed that between pairs of variables in configurations: a standard sample with a modified sample, for all tested samples there are significant statistical differences in the distributions of hardness values. Studies have shown that the modification of the mechanical and strength properties of composite materials, through the use of an aluminum filler, makes it possible to obtain materials with variable parameters that can be useful and attractive in many new areas, depending on the application and user requirements.

References

Abramczyk, N., Drewing, S., Panasiuk, K., Żuk, D., 2022, Application of Statistical Methods to Accurately Assess the Effect of Gamma Aluminum Oxide Nanopowder on the Hardness of Composite Materials with Polyester–Glass Recyclate, Materials, vol. 15(17).

An, Q., Xiong, W., Hu, F. Yu, Y., Hu, S., Gana, X., He, X., Zhao, J., Yuan, S., 2023, Direct Growth of Single-Chiral-Angle Tungsten Disulfide Nanotubes Using Gold Nanoparticle Catalysts, Nature Materials.

Cao, D., 2023, Strengthening the Interphase of Thermoplastic Sandwich Composites by Interleaving Carbon Nanotube Yarns, Materials Today Communications, vol. 36.

Lee, E.C., Nian, C.Y., Tarng, Y.S., 2007, Design of a Materials Processing Technologies, Archives of Materials Science and Engineering, vol. 28, no. 1, pp. 48–56.

Garga, P., Jamwal, J., KumarKishor Kumar, D., Chaudhery, S., Hussaind, M., Guptae, P., 2019, Advance Research Progresses in Aluminum Matrix Composites: Manufacturing & Applications, Journal of Materials Research and Technology, vol. 8, no. 5, pp. 4924–4939.

Gustin, J., Joneson, A., Mahinfalah, M., Stone, J., 2020, Low Velocity Impact of Combination Kevlar/Carbon Fiber Sandwich Composites, Composite Structures, vol. 69, no. 4, pp. 396–406.

Haldar, P., Modak, N., Sutradhar, G., 2017, Comparative Evaluation of Mechanical Properties of Sisal-Epoxy Composites With and Without Addition of Aluminum Powder, Materials Today, Proceedings, vol. 4, no. 2, pp. 3397–3406.

Herakovich, C.T., 2012, Mechanics of Composites: A Historical Review, Mechanics Research Communications, vol. 41, pp. 1–20.

Karbhari, V.W., 2007, Durability of Composites for Civil Structural Applications, Woodhead Publishing Series in Civil and Structural Engineering, pp. 1–10.

Kumar, T.S., Shivashankar, G.S., Dhotey, K., Singh, J., 2017, Experimental Study Wear Rate of Glass Fibre Reinforced Epoxy Polymer Composites Filled with Aluminum Powder, Materials Today, Proceedings, vol. 4, no. 10, pp. 10 764–10 768.

Kyzioł, L, Panasiuk, K., Barcikowski, M., Hajdukiewicz, G., 2020, The Influence of Manufacturing Technology on the Properties of Layered Composites with Polyester–Glass Recyclate Additive, Progress in Rubber, Plastics and Recycling Technology, vol. 36, no. 1, 18–30.

La Mantia, F.P., Morreale, M., 2011, Green Composites: A Brief Review, Composites Part A: Applied Science and Manufacturing, vol. 42, no. 6, pp. 579–588.

Lee, E.C., Nian, C.Y., Tarng, Y.S., 2007, Design of a Materials Processing Technologies, Archives of Materials Science and Engineering, vol. 28, no. 1, pp. 48–56.

Li, Z., Misra, R.P., Li, Y., Yao, Y.-Ch., Zhao, S., Zhang, Y., Chen, Y., Blankschtein, D., Noy, A., 2023, Breakdown of the Nernst–Einstein Relation in Carbon Nanotube Porins, Nature Nanotechnology, vol. 18, pp. 177–183.

Misnon, M.I., Islam, M.M., Epaarachchi, J.A., Lau, K., 2016, Potentiality of Utilising Natural Textile Materials for Engineering Composites Applications, Materials & Design, vol. 59, pp. 359–368.

Mrówka, M., Woźniak, A., Prężyna, S., Sławski, S., 2021, The Influence of Zinc Waste Filler on the Tribological and Mechanical Properties of Silicone-Based Composites, Polymers, vol. 13, no. 4.

Pendhari, S.S., Kant, T.,.Desai, Y.M., 2008, Application of Polymer Composites in Civil Construction: A General Review, Composite Structures, vol. 84, no. 2, pp. 114–124.

Saheb D.N., Jog J. P., 1999, Natural fiber Polymer Composites: A Review, Advances in Polymer Technology, vol. 18, no. 4, pp. 351–363.

Sanjay, M.R., Arpitha, G.R., Naik, L.L., Gopalakrishna, K., Yogesha, B., 2016, Applications of Natural Fibers and Its Composites: An Overview, Natural Resources, vol. 7, no. 3, pp. 34–45.

Selvaraju, S., Ilaiyavel, S., 2001, Applications of Composites in Marine Industry, Journal of Engineering Research and Studies, vol. 2, no. 2, pp. 89–91.

Singh, T.J., Samanta, S., 2015, Characterization of Kevlar Fiber and Its Composites: A Review, Materials Today, Proceedings, vol. 2, no. 4–5, pp. 1381–1387.

Su, J., Musgrave, C.B., Song, Y., Huang, L., Lin, Y., Li, G., Xin, Y., Xiong, P., Li, M.M-J., Wu, H., Zhu, M., Chen, H.M., Zhang, J., Shen, H., Tang, B.Z., Robert, M., Goddarda III, W.A., Ye, R., 2023, Strain Enhances the Activity of Molecular Electrocatalysts Via Carbon Nanotube Supports, Nature Catalysis, vol. 6, pp. 818–828.

Tekinalpa, H.L., Kunc, V., Velez-Garcia, G.M., Duty, C.E., Love, L.J., Naskar, A.K., Blue, C.A., Ozcan, S., 2014, Highly Oriented Carbon Fiber–Polymer Composites Via Additive Manufacturing, Composites Science and Technology, vol. 105, pp. 144–150.

Thostenson, E.T., Ren, Z., Chou, T., 2001, Advances in the Science and Technology of Carbon Nanotubes and Their Composites: A Review, Composites Science and Technology, vol. 61,

no. 13, pp. 1899-1912.

Zhang, Z., Zhang, F., Du, J., Hu, S., 2023, Effect of N–Ni Coordination Bond on the Electrical and Thermal Conductivity of Epoxy Resin/Nickel‐Coated Graphite, Journal of Applied Polymer Science, vol. 141, no. 11.

Downloads

Published

2024-03-28

How to Cite

Żuk, D., Abramczyk, N., Panasiuk, K., Dudzik, K., & Ziegler, B. (2024). ANALYSIS OF THE EFFECT OF THE ADDITION OF ALUMINUM POWDER ON POLYESTER-GLASS COMPOSITE PROPERTIES IN TENSILE AND HARDNESS TEST. Scientific Journal of Gdynia Maritime University, (129), 33–45. https://doi.org/10.26408/129.03

Issue

Section

Articles

Categories